Network Partner (Lldp) - pathway VIA PWVIA RM P12 User Manual

100Mbit Full Duplex
1Gbit Full Duplex (1Gbit Copper Ports Only))
10Gbit Full Duplex (SFP+ Ports Only)
LINK STATUS
Reports current link status and speed. Read Only.
LAST LINK CHANGE
Displays the time elapsed since the last change in the Port Link Status. Shown as X Days, HH:MM:SS
(Hours:Minutes:Seconds). Useful for diagnostic or troubleshooting purposes to determine if a Port has gone down
unexpectedly, for example.
SFP+ MODULE TYPE
Reports the detected type of SFP+ (enhanced Small Form-factor Pluggable) fiber optics adapter. Read Only. Applicable to
Ports 13 and 14.
PORT TYPE
Reports Port Type. Read-only.
Gigabit Capable Fiber
10 Gigabit Capable Fiber
Gigabit Capable Copper RJ45
Fast Ethernet Capable Copper RJ45

NETWORK PARTNER (LLDP)

PARTNER NAME
If the connected device supports Link Layer Discovery Protocol (LLDP), such as Vignette devices, Pathport gateways and
other VIA switches, the connected device's name will appear here. Read-only.
PARTNER PORT
If the connected device supports Link Layer Discovery Protocol (LLDP), this will show the Port Number on that device that
this port is connected to.
If the connected device is not a switch and has only one port, this will show "Eth".
48
PWVIA RM P12 Ethernet Switches - Manual July 2021