Vlan Properties/Services - pathway VIA PWVIA RM P12 User Manual

VLAN PROPERTIES/SERVICES

VLANs must be enabled prior to configuring these services. You will find the VLAN Enable/Disable Property in the VLAN
Global Properties Window in the VLAN Config window or under the Settings Menu.
NETWORK PROPERTIES
IP MODE
Disabled: No IP assigned to this VLAN by this VIA
Static: IP settings manually set by user (default for VLAN ID#1 / management VLAN). You must set a Static IP address if
you want to enable DHCP and/or IGMP on this VLAN.
Dynamic: IP settings obtained from DHCP server.
IP ADDRESS
User-configured Internet Protocol address (IPv4) for this switch on the selected VLAN.
SUBNET MASK
User-configured subnet mask applied to VLAN.
GATEWAY
Network traffic on this VLAN requesting addresses outside of the assigned subnet will be routed through this IP address.
July 2021 PWVIA RM P12 Ethernet Switches - Manual
41