Ring Protect Properties (Eaps) - pathway VIA PWVIA RM P12 User Manual

SixEye STATUS
This shows the status of the SixEye connection.
Unprovisioned (default).
No Internet Connection. There is a problem with the device finding an Internet connection. Check the device's IP
Settings, specifically the Gateway.
DNS Failure. The device has found a connection, but there is a problem with resolving URLs. Check the device's DNS
settings.
Invalid System Time. The device has connected to the Internet, but there is a problem with the System Time. Check the
device's NTP server settings.
SixEye Init. The device is currently initializing a connection with SixEye.
SixEye Init Error. The device could not initiate a connection with SixEye.
Not Connected. The device is not currently connected to SixEye.
Connected. The device is connected to SixEye.

RING PROTECT PROPERTIES (EAPS)

Allows VIA switches to be connected in a physical wiring ring using EAPS (Ethernet Automatic Protection Switching. See
Appendix 4: EAPS & RSTP - Ring Protection for details).
MODE
Set the function for Ring Protect Mode.
Disable (default): Ring Protect is disabled. When set to Disabled, the remaining Properties below are hidden.
Transit: Sets the selected switch to act as a Transit switch.
Master: Sets the selected switch to act as the Master switch.
July 2021 PWVIA RM P12 Ethernet Switches - Manual
35