Menus; Network Setup - pathway VIA PWVIA RM P12 User Manual

MENUS

NETWORK SETUP

This menu allows review and changes to the switch IP mode, IP address, subnet mask, and default gateway. These settings
are the default values for the Management VLAN (typically VLAN 1) and will be used if VLANs are disabled. Scroll the encoder
knob to highlight the property you want to edit, and push the knob to edit the value. Scroll the knob again to choose the new
value, and push the knob to confirm.
Depending on the item you are editing, you may have to scroll down to select the <Back> option to return to the previous
menu, or select Save and Apply to confirm. In some menus you may also select Discard Changes to return to the previous
menu without committing changes.
Menu Item
IP Mode
IP Address
58
Network Setup
IP Mode: Static
IP Address: 10.30.142.169
Subnet Mask: 255.0.0.0
Gateway: 10.0.0.1
<Back>
Determines how the VLAN's IP settings will be obtained.
Static (default for VLAN 1): IP Settings manually set by user.
Dynamic: IP Settings will be obtained from a DHCP server.
<Back>: Return to previous menu
Manually sets IP address (IPv4).
Turn encoder to set each octet. Push to accept and move to next octet. Illegal values
are not accepted.
PWVIA RM P12 Ethernet Switches - Manual
Description
July 2021