Kohler 24RCL Manual page 33

SiteTech Group
Generator Metering
Generator Metering
Generator Metering
Generator Metering
Generator Metering
Generator Metering
Generator Metering
Genset Info
Genset Info
Genset Info
Genset Info
Genset Info
Genset Info
Genset Info
Genset Info
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Run Time
Genset Personality Profile
Genset Personality Profile
Genset Personality Profile
* Read Only = Not adjustable
w Load management device (LCM, load shed kit, or RXT with combined interface/ load management board).
[ Notes indicate applicability to genset or accessories. N/A = Not applicable to the models covered in this manual.
] See TT-1584 for more information about digital inputs and outputs.
Grayed rows are visible in SiteTech but do not apply to all models.
TP-6907 5/16
Parameter
Generator Voltage L3-L1
Generator Voltage Average
Line To Line
Generator Current L1
Generator Current L2
Generator Current L3
Generator Current Average
Generator Frequency
Genset Model Number Select
Genset Serial Number
Alternator Part Number
Genset Controller Serial
Number
Engine Part Number
Engine Model Number
Engine Serial Number
Genset State
Genset Controller Clock Time
Genset Controller Total
Operation Time
Engine Total Run Time
Engine Total Run Time Loaded
Engine Total Number Of Starts
Genset Date Time Of Last
Maintenance
Engine Run Time Until
Maintenance
Genset Controller Date Format
Genset Controller Time Format
Genset Date Time of Next
Maintenance
Maintenance Period In Days
Maintenance Period Remaining
Genset Controller Clock Time
Zone Offset
ECM Model
Maximum Alternator Current
Engine Number Of Flywheel
Teeth
Adjustment
Range *
Units
V Read Only
V Read Only
A Read Only
A Read Only
A Read Only
A Read Only
Hz Read Only
(Dropdown list)
0--20 characters
0--20 characters
1--10 characters
0--20 characters
GW 2.2
(Auto select with
genset model)
0--10 characters
N/A Read Only
Read Only
h Read Only
h Read Only
h Read Only
Read Only
Read Only
(See Section 2.3.4,
Resetting the
Maintenance Timer)
h Read Only
MM/DD/YYYY or
DD/MM/YYYY
12 or 24 hr
Read Only
days Read Only
s Read Only
Read Only
Auto select with
genset model
DO NOT CHANGE
A Read Only
Locked
Default
Setting
Notes
[
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Factory set
per unit.
See
N/A
Section3.3.2
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1/1/01
12:00:00
AM
200.0
MM/DD/
YYYY
12 Hr
N/A
365
31536000
1/1/01
12:00:00
AM
Impco ECM
920
1
Section 3 Controller 33