Installing Watchport Sensor Drivers - Digi Inside Out Watchport Installation Manual

Installing Watchport Sensor Drivers

Note: If your computer is connected to the internet, the latest Microsoft certified drivers will be
automatically downloaded from the Microsoft driver update server. Also, you must be logged into
an account with administrator privileges.
1) Plug in the Base Unit. (For more information see "Cabling Watchport" on page 6.)
2) Insert the "Edgeport Driver" CD version 2.80 or above into your CD-ROM drive.
3) When the Found New Hardware Wizard appears click Next, and the drivers will be
automatically installed from the CD. Installation is complete when no more dialogs
appear.
You must be logged into an account with administrator privileges.
1) Plug in the Base Unit. (For more information see "Cabling Watchport" on page 6.)
2) Insert the "Edgeport Driver" CD version 2.80 or above into your CD-ROM drive.
3) When the Found New Hardware Wizard appears, select Install from a list or specific
location (Advanced) and click Next.
4) Select Search for a suitable driver for my device and click Next.
5) Select Specify a location and click Next.
6) Type in <CD drive letter>:\Win2k and click OK.
7) Confirm that Windows is pointing to <CD drive letter>:\Win2k. Then click Next.
8) Note: Drivers installed from the CD have received "Designed for Windows 2000"
certification. Drivers downloaded from our web site may be pending certification. If so,
Windows 2000 will display a warning: Digital Signature Not Found. Click Yes to continue
with driver installation. If you click No you will need to contact Inside Out Networks
Technical Support (512-306-0600) before installing your USB Plus Series product.
9) Click Finish to complete the driver installation.
1) Insert the "Edgeport Driver" CD version 2.80 or above into your CD-ROM drive.
2) Plug in the Base Unit. (For more information see "Cabling Watchport" on page 6.)
3) After connecting the USB cable, the Add New Hardware Wizard appears. Click Next.
4) Select Search for the best driver for your device and click Next.
5) Select Specify a location and type in <CD drive letter>:\Win98. Then click Next.
6) Confirm that Windows is pointing to <CD drive letter>:\Win98. Click Next. Windows will
then copy over the driver files.
7) Click Finish to complete the driver installation.
Watchport Installation Guide (90000406 Rev. D) – Page 4
For Windows XP and 2003 Server Users
For Windows 2000 Users
For Windows 98, and Me Users