System Settings - RC Electronics FENIX User Manual

FENIX – user's manual
3.2.1.6 Pages
In "Pages" sub-menu, a list of different primary pages can be viewed. The pilot can choose from
list which of pages will be show or hide during device operation. Sub-menu includes following
list of pages:
➢ Thermal assistant
➢ Airport

3.2.2 System settings

Just like in user setting, we also have following of system sub-menus for system settings:
➢ Glider
➢ Transfer
3.2.2.1 Glider
In "Glider" sub-menu all settings connected to properties of glider can be adjusted:
 Select glider – entering setting will display a list of preinstalled types of the glider.
Simply select the type of glider and confirm the selection.
By confirming the type "User polar", properties of glider type will be defined with
variables in sub-menu.
 Polar A – variable to set polar A parameter of glider.
 Polar B – variable to set polar B parameter of glider.
 Polar C – variable to set polar C parameter of glider.
 Empty mass – variable to set empty mass of glider.
 Reference mass – variable to set reference mass of glider.
 Max mass – variable to set maximal mass of the glider.
 Wing area – variable to set wing area of glider.
Please see the documentation of your glider for all variables in "Glider" sub-menu.
➢ Flarm
➢ Task
➢ Zone
➢ Inputs
NOTE
27
Document Revision: 0.1
December 2020
➢ Turn-point
➢ GPS info
➢ Units
➢ User port