MST-5C INSTALLATION
Connection Procedure
Detailed Wiring Diagrams
Typical Sensor Wiring for Probes
The inside temperature sensor should be located in the area which gives the
most accurate temperature reading to achieve optimum ventilation. The sensor
should also be connected to the MST-5C with a shielded two-wire cable. It
should be located in an area protected from operating machinery, animal bites,
personnel or anything that could damage the sensor. See also "General
installation guidelines".
The outside temperature sensor should be installed in a location which is not
influenced by heat generated from inside the building or direct sunlight. It should
also be protected from physical damage.
FIGURE NO. 2 Typical Temperature Probe Wiring
PROBE
SHIELD
FIGURE NO. 3 Typical Humidity Probe Wiring
MODULE S
LINE 115/230V
SHIELD
ONLY WITH
MST-5C/H
Section B-10
MST-5C
www.monitrol.com