BAT BATmode 2S User Manual page 57

48 USER MANUAL BATMODE 2S/2S+ SYSTEM
4.2.2.4 <myBAT> Box
myBAT is a cloud-based monitoring, control and administration tool for your BATmode system. It
allows you to view the status of your monitoring system and control it remotely. Furthermore,
information about recorded data are imaged and can be exported to external tools. For further
information and to signup visit www.mybat.bioacoustictechnology.de.
You activate myBAT for your BATmode system by selecting either <Continuous myBAT> or <Daily
myBAT> in the corresponding drop-down menu. While <Daily myBAT> only updates the data in myBAT
after a restart of BATcontrol and every day at 12:00 o'clock AM, <Continuous myBAT> updates the data
continuously. Please note that the remote functionality, i.e. the remote control of the BATmode
system via myBAT, is only available with <Continuous myBAT>. Furthermore, enter a password in the
field <myBAT Password>. You will need this password to assign your BATmode system in myBAT to
your account.
The last time BATcontrol updated the system status on myBAT is shown under <Last myBAT Update>.
myBAT requires an active Internet connection in which port 3306 may not be blocked.
By using myBAT increased charges of your Internet service provider may occur. Use the
option <Daily myBAT> to reduce the amount of data to be transferred.
4.2.2.5 <Advanced Options and Information>-Box
The <Advanced Options and Information>-Box shows the most important addresses of the BATmode
system that are required to connect via remote access:
•
<IP Address of LAN Adapter>: Address of the LAN adapter to establish a wired connection via
"Remote Desktop Connection". Alternatively, the computer name "BATmode" can be used
instead of the IP address.
•
<IP Address of WIFI Adapter>: Address of the WIFI adapter to establish a wireless WLAN
connection via the "Remote Desktop Connection" to the WIFI hotspot of the BATmode.
•
<IMEI>: 15-digit IMEI ID of the integrated cellular modem of the BATmode.
•
<Mobile Number>: The mobile phone number of the inserted SIM card. If no mobile number
is displayed, despite a SIM card is inserted and successfully registered in the mobile network
(see Welcome page), this does not affect the functionality of the mobile radio connection.
•
<MAC Address >: The MAC address is used to uniquely identify the BATmode in myBAT.
All received SMS and myBAT commands are stored in a log file. To open the log file press <Open Remote
Log-File>.
With the button <Reset WWAN Modem>, a hardware reset of the modem can be carried out if a
problem with the mobile radio modem occurs. SMS connection as well as a set mobile data connection
reconnect automatically after the reset.