Microphone Disc Gm50 (Optionally); Microphone Disc Gm50 (Optionally); Microphone Disc Gm90 (Optionally) - BAT BATmode 2S User Manual

9 USER MANUAL BATMODE 2S/2S+ SYSTEM

2.4 Microphone Disc GM50 (optionally)

Microphon / Heating
Connector
Reference Signal Speaker
Connector
The Microphone Disc GM50 can either be used with the enclosed mounting plate or with an optional
tripod. Nevertheless, calibration of the GM50 is executed with mounted mounting plate.
To connect the microphone and the reference signal speaker of the GM50 please use the Y-XLR
microphone cable.

2.5 Microphone Disc GM90 (optionally)

Microphone / Reference
Signal Speaker Connector
Mounting Hole
Do not remove the windscreen foam, as this has an essential influence on the calibration of your
microphone disc.
Mounting Hole
Figure 5: Front and Back View Microphone Disc GM50
Microphone Capsule
Heating Connector
Figure 6: Front and Back View Microphone Disc GM90
Mikrofon Capsule
Reference Signal Speaker
Windscreen made
of Foam
Reference Signal Speaker