17
USER MANUAL BATMODE 2S/2S+ SYSTEM
3.1.8
USB Hub (optionally)
The USB hub has to be mounted protected against splashing water and mechanical strain.
To install the USB hub, use either the mounting holes in the hub housing or the enclosed DIN rail
mount.
bat bioacoustictechnology recommends the use of the BATbox S. This is especially designed for an easy
and safe installation of the USB hub in the nacelle of wind turbines. The USB hub is fixed and grounded
in the BATbox S on a DIN rail.
3.1.9
USB power plug (optionally)
The USB power plugs, which supply the heating units of the microphone discs, have to be plugged into
a 230V socket protected against splashing water.