Table of Contents
Advertisement
4
USER MANUAL BATMODE 2S/2S+ SYSTEM
2.1.1
On-/Off-Switch
The On-/Off-Switch allows to switch the system on or off. Table 1 lists all possible system states in
dependency of the duration the switch is pressed.
Table 1: System state in dependency of the duration the on-/off-switch is pressed
If the system is
in the following
state...
Off
On
On
In case of power failure, the BATmode system will restart automatically when power returns.
2.1.2
Power LED
The white Power LED shows the state of the BATmode.
the Power LED.
2.1.3
Status LED
The blue-red Status LED shows the monitoring state.
Status LED.
LED state
Off
Blue
Blue blinking
Blue-red blinking
... and the On-/Off-switch is
pressed for...
less than four seconds
less than four seconds
more than six seconds
Table 2: States of the Power LED
LED state
Off
Continuously on
Table 3: States of the Status LED
Description
BATcontrol software not started
BATcontrol software started,
monitoring off
BATcontrol software started,
monitoring on
Monitoring start not possible –
Please check calibration and
UltraSoundGates
...the system
changes to the
following state
On
Shutdown
Off
depicts all possible states of
Table 2
Description
Device off
Device on
depicts all possible states of the
Table 3
Advertisement
Table of Contents
