Table of Contents
Advertisement
27
USER MANUAL BATMODE 2S/2S+ SYSTEM
Example for MAC OS:
The following steps have to be executed on a directly connected Apple PC to remotely access a
BATmode:
(a) Connect the BATmode directly with the other PC via an Ethernet cable.
(b) Add in the LAN Network settings a new search domain of your choice in the <DNS>
tab under <Advanced...> (see chapter 3.4.1)
(c) Open the <Microsoft Remote Desktop> application available in the App Store.
(d) Enter in the field <PC name> the computer name "batmode"
(e) Press <Add>. You can then establish the connection by double-clicking on the
created entry
3.4.3
Remote Access via Cellular Data Connection
The cellular data connection is established via the mobile network. For this purpose, a SIM card has to
be inserted in the BATmode and a connection has to be configured (APN settings, see bullet 1 and 7 in
chapter 3.3).
Subsequently, if mobile reception level and SIM card balance are sufficient, the BATmode can be
accessed remotely. Indeed, due to technical reasons, the SIM card need to feature a public IP address
(ask your provider) to establish a connection. Alternatively, server based remote services can be used
(bat bioacoustictechnology recommends TeamViewer, see chapter 3.4.4). However, to utilize those
services, the corresponding software has to be installed on the BATmode as well as on the accessing
PC, smartphone or tablet.
Advertisement
Table of Contents
