Table of Contents
Advertisement
23
USER MANUAL BATMODE 2S/2S+ SYSTEM
3.4 Remote access to the BATmode System
Alternatively, you can use peripheral devices named in chapter 3.2 to parameterize the BATmode
system and start the acoustical monitoring or you can utilize remote access via WIFI, LAN or cellular
network connections.
3.4.1
Remote Access via WIFI Connection
To allow for a remote access via WIFI BATcontrol provides a WIFI hotspot (pre-configured by bat
bioacoustictechnology):
•
SSID: Your chosen SSID (pre-configured SSID: „BATmode")
•
WIFI password: Your chosen WIFI password (pre-configured password: „12345678")
•
IP of the WLAN adapter: The IP can be found in BATcontrol on the connectivity page or in
myBAT. In most cases, the IP is "192.168.137.1".
•
User: BAT
•
User password: Your chosen user password (pre-configured user password: „12345")
The SSID as well as the password of the WIFI hotspot can be changed in BATcontrol.
To change the user password please refer to bullet 6 in chapter 3.3.
Remote access is possible via WIFI-capable PCs (Windows, Linux or Mac OS operating systems),
smartphones or tablets (Android, Windows phone, iOS), whereat additional programs or apps might
be necessary. bat bioacoustictechnology recommends the following software tools:
•
Windows: Additional software is not required; software is integrated in Windows (Remote
Desktop Connection)
•
Mac OS and iOS: Microsoft Remote Desktop
•
Android and Windows Phone: Microsoft Remote Desktop
Advertisement
Table of Contents
