Table of Contents
Advertisement
37
USER MANUAL BATMODE 2S/2S+ SYSTEM
4.2 Operation
4.2.1
Page: Welcome
The welcome page shows the most essential data of your monitoring and the status of the components
of the BATmode system.
4.2.1.1
<Connection Status> Box
The <Connection Status> box shows the current connection status of BATcontrol:
•
Up to four UltraSoundGates 116Hnbm, one UltraSoundGate 116Hnbm and up to three
UltraSoundGates 116Hnbm-r or one UltraSoundGate 416Hnbm from Avisoft Bioacoustics can
be used to acoustically record bat calls. The type and number of connected UltraSoundGates
are displayed below the UltraSoundGate icon.
•
Under the symbol of a SIM card the current state of the mobile radio connection is displayed.
All possible states are listed in Table 10.
Basically, bat bioacoustictechnology recommends the use of PIN free SIM cards,
because only an inactivated PIN allows to unlock the SIM card after a reboot of the
system automatically.
•
The flame symbol indicates whether a temperature sensor is connected either to the analog
temperature sensor input or via USB/RS485 (COM) via a Laser Precipitation Sensor
(BATmode 2S+ only).
•
The drop icon indicates whether a precipitation sensor is connected either to the analog
precipitation sensor input or via USB/RS485 or USB/RS422 (COM) (BATmode 2S+ only).
Figure 26: Welcome Page
Advertisement
Table of Contents
