Table of Contents
Advertisement
Setting the controls
Plug your Breadman™ into the wall socket (switch the socket on, if it has a switch), then
use the switch at the rear to switch on (press 1). The machine will beep and the display
will show flashing zeroes.
Select program
1. Press and release the Select
button till the pointer on the right
of the display moves to the
program you want. It takes two
presses each to move through the
first four programs, as RAPID will
show up on alternate presses.
When the pointer reaches the
bottom of the display (Bake Only),
the display changes to show
PERSONAL RECIPE 1. Further
presses go through personal
recipes 2 to 5, then the pointer
reappears at the top of the
display.
2. If you want to use one of the
'RAPID' programs, leave it
showing, if not, press Select
again to remove it.
3. If you go past the setting you
want, press the Stop/Reset
button, to go back to the top
of the display.
Size of loaf
1. To set the size of your bread,
press and release the Size button
to cycle the display through
2LB/1.5LB/1LB. These represent
1kg, 750g, and 500g respectively.
It starts off showing 2LB.
Advertisement
Table of Contents
