Table of Contents
Advertisement
Start the Breadman™
When you're happy with the settings,
press the Start button, and watch the
machine leap into action. The LED lights
up, the timer colon (:) flashes, the timer
counts down, to show the amount of time
left, and the display tells you which
process is going on.
If you're using the Wholewheat or Jam
programs, nothing happens for between
5 and 30 minutes.
Don't worry, this is intentional. These
recipes need this time to preheat the
ingredients. PREHEAT will show on the
left of the display.
Oops!!!
If you discover you've made a mistake after pressing Start, press and hold the Stop/Reset
button and then reprogram the machine. Don't leave it too long. If the program is
substantially into the cycle before you stop it, the results will be affected. In that case, you
have to decide whether it's best to: let the program run stop the program, throw out the
ingredients, and start from scratch stop the program, use the Program function to adjust
the cycles to allow for the time already run, then run it as a Custom Program
Dough consistency
Keep an eye on the dough (through the window) during the first 5 minute kneading period.
It should form a smooth ball. If it doesn't, you might have to adjust the ingredients. Do this
during the second kneading.
Adjusting
Press the Pause button and hold it down for 2 seconds to stop the program cycle. If the
dough looks sticky or clings to the sides of the loaf tin, sprinkle a tablespoon of flour over
it. If it looks too dry, give it a tablespoon of warm water.
Don't leave the lid open for longer than you need to – open it, add whatever you need and
then close it.
Advertisement
Table of Contents
