Product Exterior - Rear; Product Interior - Thermo Scientific TSG Series Installation And Operation Manual

Product Exterior – Rear
Access Port
Access port (located on the back side of the unit) is shipped
sealed with a foam plug that must be removed prior to use.
Additionally, the gray plastic knock-out must be removed.
After inserting the device, we recommend reinserting the
foam plug as snug and flush as possible to insulate against
cooling loss. Putty may also be used to help reseal the area. If
the device is an independent probe, it should be installed on
the shelf within the cabinet usable space.
Evaporation Tray
The evaporation tray is located on the bottom rear of the unit.
12 | Getting To Know Your Product

Product Interior

Interior Components
• Air temperature sensor
• External pass-through port
• Adjustable shelving
Adjustable Shelving
The TSX undercounter refrigerator shelves are shipped with
protective wrapping that must be removed prior to use.
Reposition the shelves by relocating the support clips in the
mounting rails to the desired height.
Only use shelves to store product. The floor of the cabinet
shall not be loaded.
5.5 cu.ft. Undercounter Refrigerator