Getting To Know Your Product
7.2 Product Exterior –
Rear
The Access Port (located on the back of the unit) is shipped sealed with a foam
7.2.1 Access Port
plug that must be removed prior to use. Additionally, the red plastic knock-out
must be removed. After inserting your device, we recommend reinserting the
foam plug as snug and flush as possible to insulate against cooling loss. Putty may
also be used to help reseal the area.
The evaporation tray is located on the bottom rear of the unit.
7.2.2 Evaporation Tray
7.3 Product Interior
Thermo Scientific TSX 5.5 cu.ft Undercounter Refrigerator
Installation and Operation
17