Motor Replacement - Pentair AUTOTROL MAGNUM 293 Installer Manual

9.6.7

Motor replacement

1. Remove the controller cover (1). See Controller cover disassembly [
2. Press the controller locking pad (4) and slide the controller
3. Loosen the two screws (6).
4. Remove the motor (5).
5. Disconnect the motor cable (3) from the controller (2).
Info
To replace the motor, you also have to disassemble the optical sensor. See Optical
sensor and controller replacement [
6. Reverse above procedure steps to rebuild.
Ref. MKT-IM-012 / D - 03.02.2022
Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Maintenance
(2)
Page 81].
→
Page 78].
→
out of its position.
79 / 110