Motor Input Voltage
Controller Power Consumption
Protection rating
3.3
Performance flow rate characteristics
The graph shows the pressure drop created by the valve itself at different flow rates. It allows
predetermining the maximum flow rate going through the valve depending on the system settings
(inlet pressure etc). It also allows to determine the valve pressure drop at a given flow rate, and
therefore to evaluate the system pressure drop vs flow rate.
Ref. MKT-IM-012 / D - 03.02.2022
Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Description
12 VAC
3 W average
IP23
FLOW RATE VS PRESSURE DROP
Pressure drop [bar]
Service Magnum IT
Service Magnum Cv
Backwash Magnum Cv & IT
15 / 110