Charging Contacts - Access Flow2A Manual

Hide thumbs Also See for Flow2A:
Table of Contents

Advertisement

12
The rail
The parking location must always be on a charging contact so that the batteries can be charged when the stairlift is
not in use.
Extra stopping places
It is possible to define a maximum of 10 stopping places for the stairlift, including the parking locations and the
stopping places at the ends of the rail.
Warning post
Warning posts can be installed in front of horizontal rail sections on the bottom or top landing to draw attention to the
risk of stumbling over the rail.
Figure 2-9: Warning posts
2.4

Charging contacts

The charging contacts are part of the power supply system.
Figure 2-10: Standard charging contact
Figure 2-11: Mobile charging contact
The positions of the charging contacts must match the positions of the parking and stopping places. Mount the
charging contacts on the rail using the supports so that the brush contacts on the drive unit contact the centre of the
charging contacts.
Mobile charging contacts are also available, which can be placed anywhere along the rail after installation.

Advertisement

Table of Contents
loading

Related Products for Access Flow2A

Table of Contents