Download Print this page

What To Do If - AEG COMPETENCE 520 B Instruction Book

Multi-function build-in single oven
Hide thumbs Also See for COMPETENCE 520 B:

Advertisement

What to do if... (something goes wrong?)
the pilot lamps do not show?
... the oven does not heat?
1. You may well have not operated all relevant switches or
2. The fuse in the fuse box has blown.
... the fuses keep blowing?
Please call an approved and qualified electrician.
... the oven lamp fails?
See Cleaning and care on page 24.
Replacement lamps are not covered by warranty and are
not free of charge.
... the oven cannot be switched on?
Check whether:
... you forgot to turn the change-over switch on the automatic
timer back to the manual symbol {a} after time controlled cook¬
ing.
Please make sure that you are not able to rectify the fault
yourself prior to calling a service engineer in connection
with one of the aforementioned problems, as the cost in¬
volved will have to be passed on even during the warranty
period.
Therefore, follow the instructions in this booklet and any
additional information which may accompany this appli¬
ance carefully.
AEG electrical appliances comply with current safety reg¬
ulations. Repairs to these appliances should only be car¬
ried out by qualified AEG engineers or AEG appointed
service agents. Repairs carried out by unauthorised per¬
sonnel could lead to considerable damage and could pose
a considerable safety hazard to the user.
Faults you
can rectify
yourself

Advertisement

loading