MG GS Owner's Handbook Manual page 68

Hide thumbs Also See for GS:
Table of Contents

Advertisement

Press the switch (1-4) to open the window, pull the switch
to close the window, The window will stop moving as soon
as the switch is released (unless the 'One-Touch' function
is active).
Note: The front and rear passenger windows can also
be operated by individual window switches, mounted
on each door.
The rear window switches will not
function if the rear window isolation switch (5) on the
driver door has been activated.
Note: When the ignition switch is in position I or II,
the power window can be operated (For safety: doors
should be closed).
Rear Window Isolation Switch
Press the switch (5) to isolate the rear window controls (an
indicator lamp in the switch illuminates), and press again to
restore control.
Note: It is recommended that you ISOLATE the rear
window switches when carrying children.
INSTRUMENTS AND CONTROLS
One Touch Down
Short press the window control switch (1 to 4) to the
"2" position and release.
automatically descends to fully open. Window movement
can be stopped at desired position at any time by briefly
pulling up the corresponding switch during descent.
One Touch Up with Anti - Trap
The front right window ( 2 ) has the "one-touch" up
function, the operating manner of this function is the same
with that of the "one-touch" down function. Window
movement can be stopped at desired position at any time
by briefly pressing the switch again.
The 'Anti-Trap' function is a safety feature which prevents
the window from fully closing if an obstruction is sensed -
if this happens the window will open slightly to allow the
obstruction be removed.
Note: Do not operate the power window controls
continuously for more than 20 seconds, otherwise the
power window controls may be disabled to protect
*
The corresponding window
1
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents