MG GS Owner's Handbook Manual page 34

fuel", "Average Speed", "Trip 2" and "Current Journey"
).
Note: If a warning message is received while the trip
computer is in use, the trip display will be replaced
by the warning message.After a warning has been
given, if there are any static warnings then they are
displayed. From here the user can navigate back to
the trip computer using the UP/DOWN trip switch. If
no static warning exists then the display will revert to
that prior to the warning.
The following information will be displayed:
1 Digital Speed
2 Average Fuel
3 Fuel Consumption
4 Range to Empty
5 Average Speed
6 Trip 2
7 Current Journey
8 Last Journey
INSTRUMENTS AND CONTROLS
Digital Speed
Displays the current vehicle speed.
Average Fuel
Average fuel consumption is calculated by dividing the
amount of fuel used by the distance travelled since last
reset. The consumption value can be reset at any time to
begin calculating new consumption values for a particular
journey or driving conditions.
Note: Average fuel consumption is related to driving
habits, road condition, load, tyre pressure, the quality
of oil, etc.
Fuel Consumption
This function is automatic and indicates the instantaneous
fuel consumption.
Range to Empty
This function is automatic and displays the remaining
distance you can travel before the fuel gauge reads empty.
The distance will change when the vehicle is refuelled.
1
17