Satellite Scan - Pansat 9000HD User Manual

2) USALS (DiSEqC 1.3 automatic operation)
(1) Satellite Position
It points out the position of saved satellite. You can change the position of the satellite by numeric keys.
(2) My Longitude
Please input Local Longitude by numeric keys
(3) My latitude
Please input Local Latitude by numeric keys
(4) Reference position
This is the same as DiSEqC 1.2 Reference
(5) Move
The satellite's position of (1) and the one calculated by value of (2) & (3) will be shown. Press OK key and it will
move.
(6) Store
Please select "Store" and the current position will be saved.
2.1.7 TP
Select a specific transponder by using the

2.1.8 Satellite Scan

After all LNB setting is finished, adjust antenna direction toward satellite until signal & quality level maximized. Then
select and confirm Satellite Scan to start scan and saved.
# Below the Menu, Signal and Quality will be displayed in the screen.
2.2 Satellite Scan
Scan all the transponder of selected satellites.
keys
◀ ▶
ⓒ 2007 by Panarex Electronics 21