Front Panel - Pansat 9000HD User Manual

5. FRONT PANEL

1. POWER
To put Power in and out of standby mode.
2. VOLUME
To make volume up and down & to change the value of a selected line
3. CHANNEL
To move up and down in the menus, To change channels.
4. Menu
To enter main menu screen.
5. Exit
To move to previous menu.
6. OK
To confirm selection.
7. Display
To show channel number, resolution, remote control commands and time in standby mode.
8. A/C reset switch
Main power ON/OFF (When you open the front door, you can see A/C reset switch).
9. Resolution Mark
To show a resolution.
ⓒ 2007 by Panarex Electronics 14