Related Manuals for Pansat 250SM
Summary of Contents for Pansat 250SM
- Page 1 USER’S GUIDE 250SM DIGITAL SATELLITE RECEIVER Panarex Electronics SUN VALLEY, CALIFORNIA, U.S.A.
-
Page 6: Specification
PREFACE 1. OVERVIEW 1. WHAT IS THIS PRODUCT FOR? 2. WHAT FEATURE DOES THIS PRODUCT OFFER? 3. FOR YOUR SAFETY 4. PLEASE CHECK THE FOLLOWING ACCRSSORIES ARE ENCLOSED 5. HOW TO USE THE REMOTE CONTROL KEY 6. FRONT PANEL 7. REAR PANEL 8. -
Page 7: What Feature Does This Product Offer
1. OVERVIEW 1. WHAT IS THIS PRODUCT FOR? This product is designed for using Digital Satellite and allows you to enjoy a lot of broadcasting whenever you want to watch it anytime. By simply pressing the button of the remote control unit, the vivid picture and life –like sound of digital broadcasting that your TV portrays through this product, allows you to watch whatever channel you wish of the digital broadcasting. -
Page 8: Additional Features
▪ Satellite Scan – Simultaneous Scan with various Satellites ▪ DiSEqC 1.2 & USALS Compatible ▪ Comparable of Setting the Frequency for SMATV System ▪ Software Upgrade via USB Memory Stick or RS232C (Receiver to Receiver, PC to Receiver) ▪ UHF- Ready ▪... -
Page 9: How To Use The Remote Control Key
5. HOW TO USE THE REMOTE CONTROL KEY Function Turns this receiver on/off. In the standby mode, it is automatically changed to TV mode that enables to watch terrestrial TV broadcasting. TV/SAT Toggles between TV & SAT TV/VCR Toggles between TV & VCR TIME Time shows current Time Sounds Off/On... -
Page 10: Operating Principle
Classifies satellite by satellite Teletext Subtitle Operating Principle ▪ Select an item by using up and down key and change the value of the highlighted (selected) item by using keys shown on the screen. Press OK to enter to the sub-menu if there is no instruction marks on the screen. ▪... -
Page 11: Rear Panel
7. REAR PANEL NAME FUNCTION S-VHS Super Video output to TV or VCR Option for UHF Remote Control lit S/PDIF For digital audio output RS232 Serial port used for software upgrade Left Audio Output Right Audio Output Component Video Output Component Video Output TV OUT Output to TV... - Page 12 8. SIMPLE DIGITAL CONNECTION When connecting receiver to TV and VCR with RF Cable (Single Antenna) 9. ANALOGUE / DIGITAL CONNECTION When connecting receiver to analogue receiver and VCR with RF Cable...
-
Page 13: Installation
2. OPERATING 1. Start Up If you are watching TV through the RF-cable, you need to adjust the Channel number. The type of TV and Channel numbers are set to PAL-G and Channel 38 at the factory. For USA, Ch3 is factory preset. Please follow the brief procedure below and watch the satellite programs. -
Page 14: Antenna Setup
2.1 Antenna Setup In this section you could know how to operate LNB set-up. 2.1.1 Satellite • When you adjust the LNB set-up, you select the satellite using OK key. • Adjust LNB type , LNB Lo-Freq, 22kHz, DiSEqC, LNB power, TP, Positioner Setting. •... -
Page 15: Satellite Scan
DiSEqC 1.2 (1) Current position Select the position number by using keys (#0~#26:default define, #27~#49: user define) ◀ ▶ (2) Movement Select East / West by using ◀ ▶ keys and press OK to stop (3) East Limit Set Move the position to the most eastern position and press OK then East Limit is stored. (4) West Limit Set Move the position to the most western position and press OK then East Limit is stored. -
Page 16: Advanced & Tp Scan
Then press OK key to execute scanning. (2) You can select satellite whatever you chose though. (3) Transponder will be consecutively scanned all selected satellites. 2.3 Advanced & TP Scan Select TP is scanning in this menu. (1) Select a satellite (2) Select TP in TP list. - Page 17 2.5 SAT & TP Edit In this mode, you can add the New Satellite and the New transponder information. Also you can update or delete the transponder information. 2.5.1 How to add a new satellite • Select “New” in the satellite name by using numeric key or CH ▲▼ keys. Press VOL ◀ ▶ keys to move digit. •...
- Page 18 Enter Down frequency, LNB polarity and Symbol Rate and press EXIT or OK Then New TP date is automatically updated. • In case you want to delete a TP Select Delete in the small menu, press OK key. Then the TP selected is deleted. 3.
-
Page 19: Favorite Edit
(2) Select a channel you want to delete by using the keys ◀ ▶ (3) Press OK key. (4) All channels that you selected are deleted. 3.1.4 How to lock/unlock the channel (1) Select P-LOCK and press OK. (2) Select the channel that you want to lock and press OK (3) This channel is now locked and the symbol of lock will be shown as a locked channel. -
Page 20: Parental Control
(3) To enter channel edit menu (4) To execute factory setting In case of forgotten password programmed call Pansat’s dealer to get master factory password. 4.3 Language Press EXIT key after you select your preferable language and audio language by using VOL ◀▶... - Page 21 That is, factory setting functions your STB (Set Top Box) the first stage. If you do not want to continue this mode, press EXIT key before you enter password. Common password is “0000”. In case selected password is forgotten, call Pansat’s dealer to get factory master...
-
Page 22: System Information
password. 5.3. System Information Show the information of model name, data and version of STB. 6. Channel List ▪ You can see the channel list as shown in the above figure by pressing OK key ▪ To watch another channel, move the cursor to the channel you want by using ▲▼ PG↑ PG↓ and press OK key ▪... -
Page 23: Audio Change
8. Audio change ▪ In multilingual program, favorite language is selected by pressing AUDIO key and CH▲▼ keys ▪ Audio mode (L-left, R-right, L/R-stereo) can be Changed by pressing AUDIO key and VOL key. ◀▶ 9. USB Memory Stick (DC 5V, Max.100mA) Warning! Please use USB Memory Stick Memory only. -
Page 24: Recall The Favorite Channel
12. Recall the Favorite channel ▪ Press FAV key to recall a stored favorite channel. ▪ Favorite channel is programmed and stored in the Favorite Edit menu. 13. Download Procedure between Receiver & PC 1. Turn the receiver power on. 2. - Page 25 3. SPECIFICATION 1 Smart Card Reader Embedded Smart Card Slot 1 Host USB2.0 with On-The-Go Front-End 1 Input Connector F-type, IEC 169-24 IF Input Frequency 950MHz to 2150MHz IF Loop Throughout 950MHz to 2150MHz IF Frequency Zero-IF Input Level -65 dBm~-25 dBm LNB Power 13 /18VDC / 500mA Max DiSEQqC Control...
-
Page 26: Black-And-White
4. TROUBLE SHOOTING There may be various reasons for the abnormal of the unit. Therefore, if the unit does not work properly, Check the unit according to the procedures shown in the table below. Problem Possible causes Remedy LED on front panel AC Power cord disconnected Connect power cord properly into the Does not light...
Need help?
Do you have a question about the 250SM and is the answer not in the manual?
Questions and answers