Table of Contents
Advertisement
2. OPERATING
1. Start Up
If you are watching TV through the RF-cable, you need to adjust the channel number. The type of TV and channel
numbers are set to NTSC and channel 3 at the factory.
Please follow the brief procedure below and watch the satellite programs.
1)
Select the language
2)
Select the antenna setup in main menu screen
3)
Adjust LNB configuration per each satellite
4)
Execute scanning to find program
5)
Exit from installation after all programs are searched.
1.1 Language
When the receiver is turned on for the first time, the language selection menu is appeared as in the Fig 1-1.
Select the desired language and press OK to confirm it.
This Receiver supports 8 languages.
English
German
French
Portuguese
Spanish
Turkish
Italian
Arabic
ⓒ 2007 by Panarex Electronics 18
Advertisement
Table of Contents
