Pansat 9000HD User Manual page 24

2.4.3 How to delete/restore a satellite
• Press OK key after selecting a satellite you want to delete.
• Press OK to confirm, otherwise press EXIT to cancel. The color of the deleted satellite name in the list is changed.
• The satellite which has had already searched channels cannot be deleted.
• To restore the deleted satellite, move the cursor to the deleted satellite and press OK key. Then select "Restore" in
the screen and press OK key.
2.4.4 How to add a new transponder
• Press OK after selecting a satellite
• Select Edit TP and then transponder list is shown.
• Press OK key selecting "NEW" in the transponder list
• Enter the Down Frequency, Symbol Rate and LNB Polarity, Tuner Type, FEC.
• Press EXIT or OK. Then new transponder information is stored.
2.4.5 How to delete or update a transponder added
• Press OK key after selecting a satellite
• Select Edit TP, then transponder list is shown
• Select a transponder you want to delete or update.
• Press OK on the TP you want to edit or delete.
• You can see the edit or delete in the small-menu.
• In case you want to edit a TP list,
Select EDIT and press OK key.
Enter Down Frequency, LNB Polarity and Symbol Rate, Tuner Type, FEC and press EXIT or OK
Then New TP date is automatically updated.
• In case you want to delete a TP
Select Delete in the small menu, press OK key.
Then the TP selected is deleted.
2.5 DVB-T Setup
ⓒ 2007 by Panarex Electronics 24