Table of Contents
Advertisement
- Wakeup service No.
- Sleep Time > > Set up by pressing numeric keys
4.2. Parental Control
After selecting parental control and entering the correct password,
the screen as shown in the right appears. The default password at the factory
is "0-0-0-0"You may change the PIN code, which is your password
in other words, and lock the receiver to prevent children
from watching programs.
4.2.1 Installation Password
You can set the function of parental control by pressing
4.2.2 Rating
You can set an age limit (All, 12, 15, 18).
4.2.3 Change PIN Code
You can change the PIN Code (Password) if you want.
(1) Enter the new password.
(2) Reenter the new password to confirm.
Warning!
You must remember the exchanged password because it is used in several functions as follows.
Password required
(1) To show parental locked channels
(2) To enter parental control menu
(3) To enter edit menu
(4) To execute factory setting
keys
as "on" or "off."
◀ ▶
ⓒ 2007 by Panarex Electronics 31
Advertisement
Table of Contents
