Table of Contents
Advertisement
2. Installation
Press the OK key. Use common password "0000." Channel edit is not accessible until satellite channel scanned and
saved. Antenna setup is appeared on screen as upper second figure.
2.1 Antenna Setup
In this section you, all parameters can be set to get enough signal & quality levels to be locked.
2.1.1 Satellite
▲▼,
• • Select the satellite by using
and press OK to enter right side menu.
◀ ▶
2.1.2 LNB type
Select LNB type using
◀ ▶
keys.
There are 5 LNB alternatives.
• Universal 1 (9750MHz & 10600 MHz)
• Universal 2 (9750MHz & 10750 MHz)
• Single-SL (5150MHz & 5750 MHz)
• Single-SH (5150MHz & 5750 MHz)
• Standard for USA (10750 or 11250)
• Single Stack (10750(V) or 10175(H))
ⓒ 2007 by Panarex Electronics 19
Advertisement
Table of Contents
