Edit Tp/Satellite - Pansat 9000HD User Manual

2.3.7 PID Scan
Select Auto or Manual mode.
Type PID number at manual mode.
2.3.8 Scan Option
Select scan option
by using
2.3.9 Network Scan
Select 'ON' or 'OFF
by using
2.3.10 Start Scan
After all setting is finished, then press OK to start scan.

2.4 Edit TP/Satellite

In this mode, you can add the new satellite and the new transponder information.
Also you can update or delete the transponder information.
2.4.1 How to add a new satellite
• Select "New" in the satellite name by using CH ▲▼ keys. Press VOL
• Maximum number of characters is 12-digit.
• Press OK key.
• Enter the Down Frequency, Symbol Rate, LNB Polarity, Tuner Type, FEC.
• Press EXIT or OK key, then new transponder information is stored.
2.4.2 How to rename a satellite
• Press OK after selecting a satellite of which you want to change name.
• Select "Rename" in the menu.
• Enter new name by using VOL ◀ ▶ Keys CH▲▼ keys and press OK key.
keys (ALL, FTA).
◀ ▶
keys .
◀ ▶
keys to move digit.
◀ ▶
ⓒ 2007 by Panarex Electronics 23