Table of Contents
Advertisement
2. OPERATING
1. Start Up
If you are watching TV through the RF-cable, you need to adjust the Channel number. The type of TV and Channel
numbers are set to PAL-G and Channel 38 at the factory. For USA, Ch3 is factory preset.
Please follow the brief procedure below and watch the satellite programs.
1)
Select the language
2)
Select the antenna setup in main menu screen
3)
Adjust LNB configuration per each satellite
4)
Execute scanning to find program
5)
Exit from installation after all programs are searched.
1.1 Language
When the receiver is turned on for the first time, the language selection menu is appeared as in the Fig 1-1. Select
the desired language and press OK to confirm it.
This Receiver supports
8
languages.
English
German
French
Spanish
Italiano
Portuguese
Turkish
Arabic
2. Installation
Press the OK Key. Use common password "0000". Parental control and channel edit are not accessible until satellite
channel scanned and saved. Antenna setup is appeared on screen as upper second figure.
13
Advertisement
Table of Contents
