Table of Contents
Advertisement
2. Installation
Press the OK key. Use common password "0000". Parental control and channel edit are not accessible until satellite
channel scanned and saved. Antenna setup is appeared on screen as upper second figure.
2.1 Antenna Setup
In this section you could know how to operate LNB set-up.
2.1.1 Satellite
• When you adjust the LNB set-up,
you select the satellite using OK key.
• Adjust TP, LNB Power, LNB Type, LNB Local freq, 22k,
DiSEqC, Legacy sw, positioner setting
• You can cancel the satellite you chose using EXIT key.
2.1.2 TP
Select a specific transponder by using the ◀ ▶ keys and ▲▼ keys.
2.1.3 LNB type
Select LNB type using
◀ ▶
There are 7 LNB alternatives.
• Universal 1 (9750MHz & 10600 MHz)
keys
and ▲▼ keys.
ⓒ 2007 by Panarex Electronics
18
Advertisement
Table of Contents
