User Maintenance Instructions; Moving And Storage Instructions; Glossary - Flo CoRe+ Max Installation Manual

User Maintenance Instructions

The CoRe+ MAX enclosure complies to NEMA 4X which is intended for indoor or outdoor use primarily to provide a
degree of protection against corrosion, windblown dust, rain, splashing water, and hose directed water; undamaged by
ice which forms on the enclosure.
As such the maintenance required to protect the integrity of the charging station enclosure is minimal, except for
cleaning which can be achieved with standard domestic products recommended to the type of soil encountered.
The charging cable though, when not in usage, should be properly rolled around the station enclosure holder and the
cable connector inserted in its enclosure at all times. Care should be taken not to bend, twist or pull on the cable from
the connector alone either to enroll or roll it on the enclosure; or when it is stuck.
When manipulating the cable, please ensure the cable outer insulation and the connector itself do not show any excessive
sign of wear such as cracks or signs of abrasion, in which case please dial the 'Installation or commissioning questions'
number at the end of this manual for reporting and case management purposes.
Moving And Storing Instructions
The charging station is designed for permanent usage and not intended for portable utilisation.
As such, storage situations will occur prior to installation in which case it is recommended that the station be kept in its
shipping packaging at temperature within -40 °C to +50 °C / -40 °F to + 112 F, and humidity not exceeding 95%
(noncondensing), until it is installed by qualified personnel.

Glossary

EVSE as Electric Vehicle Supply Equipment
EV as Electric Vehicle
17
CoRe+ Max TM Installation Manual