Lubrication And Cooling; Sliding Bushing And Oil Seals - Marzocchi Bomber Owner's Manual

Technical information
TST: The TST system uses a sealed cartridge
with a rubber lung for oil collection. The TST
cartridge is provided with a rebound adjuster in
the lower area and a 5-position compression
adjuster in the upper area.
Remote control for TST cartridge: On request,
the TST cartridge can be supplied with a remote
control that lets the riders lock the fork keeping
their hands on the handlebar.
DOPPIO AIR: The DOPPIO AIR system is
provided with three independent air chambers,
allowing customization of settings according to
the rider's needs.
RC2: This new system allows for control of the
rebound and compression damping by means of
two external adjusters, as well as of the spring
2
preload.
126
RC2X: This system is the evolution of RC2
system with an extra X-cartridge on the left leg
for the control of the fork's compression at travel
end.

2.3 Lubrication and Cooling

Pumping rods are immersed in oil (Open Bath
System). This system provides proper lubrication
and cooling of the
Furthermore, the oil volume works as a damping
and setting element.
The Open Bath
maintenance frequency compared to a sealed
cartridge system. On models of the fork that use
elastomers, the proper internal lubricant is
grease.

2.4 Sliding Bushing and Oil Seals

Stanchion tubes are guided in the sliders by two
Teflon'-coated bushings, free from static friction.
The seal system minimizes oil leaks, and
contamination from particles entering the fork, by
means of a special, dual-lip oil seal and a dust
seal at the top of each slider
inner sliding parts.
system reduces the