Selecting The Clip To Be Exported - Sony HKSR-5804 Operation Manual

For uncompressed data, DPX/CIN files in the NFS server
are recorded basically as is from the file name to the
header.
Set the following item. In the table below, the default
setting is indicated by an asterisk (*).
Item Function/settings
+EXTRA BIT Specifies whether the two extra bits of the
32 bits allocated to each pixel of a 10-bit
DPX file (10 bits being allocated to R, G,
and B each) are recorded or not.
*
Ignore
recorded.
Keep: The two extra bits are recorded.
Note
Normally, the two extra bits are not used.
To use the tape efficiently, select "Ignore".

Selecting the Clip To Be Exported

For compressed data
Clip selection
1
Access the VTR from the web client to display the web
application, click the EXPORT menu select button,
and then click the DISK CONTROL tab.
The DISK CONTROL tag display opens.
2
Set the following items.
In the table below, the default setting is indicated by an
asterisk (*).
24
Exporting Files
: The two extra bits are not
Item Function/settings
IN TC(insert) Specifies how the recording start
position (IN point) on the tape is
determined.
*
Preset
tag display in the EXPORT
menu, use the MarkIn button
or enter the timecode to
specify the IN point.
File Name: Acquires the timecode
of the IN point from the file
name of the clip.
For details, see "About the "File
Number" setting and "File
Header" setting in the IN TC
(insert) box" on page 24.
File Header: Acquires the
timecode of the IN point from
the header of the DPX file.
For details, see "About the "File
Number" setting and "File
Header" setting in the IN TC
(insert) box" on page 24.
EXPORT LOG Specifies whether or not an export
log file is created.
disable: An export log file is not
created.
enable(Log Dir)*: The export log
file is created and stored in
the directory for log storage.
To view a created export log file,
click the Export LOG button at the
lower right of the DISK CONTROL
tag display.
For details on the export log file,
see "Export log display" on page
28.
For details on how to manage the
export log file, see "Log File
Management" on page 36.
LOG PROXY Specifies the thumbnails used
with the export log file.
Link to Original File: The original
proxy is used as the
thumbnail.
Copy to Log Directory
is copied to the directory for
log storage.
For details, see "About the
"Copy to Log Directory" setting
in LOG PROXY" on page 25.
COMMENT Enter a comment to be written to
the export log file.
About the "File Number" setting and "File
Header" setting in the IN TC (insert) box
When the TC checkbox for file name and directory
setup (see page 18) is checked, the serial number of the
file is obtained by converting the timecode of the tape
into frames. To return the imported file to its original
position on the tape after processing (e.g., after dirt and
scratch removal), set the IN TC (insert) box to "File
: In the VTR CONTROL
*
: The proxy