System Configuration Example; Locations Of Parts - Sony HKSR-5804 Operation Manual

System Configuration Example

The following illustration shows an example of a network system configuration with an SRW-5800 incorporating the
HKSR-5804.
Shared file server
Web client

Locations of Parts

This section explains the connectors that are added to the
connector panel of the SRW-5800 when the HKSR-5804
is installed.
For details on the other panel connectors, refer to the
Operation Manual supplied with the SRW-5800.
1 AUX INPUT A/B connectors
a AUX INPUT A/B connectors (BNC type)
Use the A connector for dubbing uncompressed data.
For details, see "Dubbing Uncompressed Data" on page
38.
b AUX OUTPUT (monitor output) A/B connectors
(BNC type)
For outputting video signals to the HD monitor.
6
Overview
Switching hub
VTR
2 AUX OUTPUT A/B connectors
3 NETWORK 2 connector
While dubbing uncompressed data, the data stream is
output from the A connector.
For details on how to specify the type of output signal, see
"To specify the type of signal output from the AUX
OUTPUT connectors" on page 9.
c NETWORK (network) 2 connector
For transferring files between the shared server and VTR
and for controlling the VTR from the web client.
CAUTION
• For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
• When you connect the NETWORK cable of the unit to
peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
ATTENTION
• Par mesure de sécurité, ne raccordez pas le connecteur
pour le câblage de périphériques pouvant avoir une
tension excessive à ce port. Suivez les instructions pour
ce port.
• Lors de la connexion du câble NETWORK de l'appareil
au périphérique, utilisez un câble blindé afin d'empêcher
tout dysfonctionnement dû au bruit de rayonnement.
VORSICHT
• Aus Sicherheitsgründen nicht mit einem
Peripheriegerät-Anschluss verbinden, der zu starke
Spannung für diese Buchse haben könnte. Folgen Sie
den Anweisungen für diese Buchse.
HD monitor