Sony HKSR-5804 Operation Manual page 18

To delete a directory
Click the Select Directory box and select the directory
that you want to delete. Then click the RMDIR button.
3
Set the following items.
In the table below, the default setting is indicated by an
asterisk (*).
Item
BASE NAME
+SubID check box
FILE DIR
+CasID check box
START
END
18
Importing Files
Function/settings
Sets the base name of imported
files.
For details on how files are
named, see "Example of file
name" on page 18.
When checked, a sub ID is added
to the picture file name and
directory name to identify the
clips. The sub ID is incremented
by 1 each time importing is
carried out.
Note
You should check this box when
multiple clips of the same name
are imported to the same
directory.
Sets the directory where imported
picture files are stored.
Use Selected Directory: Imported
picture files are stored right
under the directory whose
name is currently displayed at
the center of the display.
*
Make New Directory : A new
directory is created directly
under the specified directory
each time files are imported.
Imported picture files are
stored in the created
directory.
For details on how the created
directories are named, see
"Example of directory name" on
page 19.
When checked, a directory with
the same name as the cassette ID
is created when picture files are
imported. The imported picture
files are stored in the created
directory.
Sets the starting serial number of
the file name (@@@@@@).
Note
A number exceeding 2147483647
(0x7fffffff) cannot be specified.
Shows the highest (last) serial
number of the file name.
Item Function/settings
TC check box When checked, the value of the IN
point timecode converted into
frame count is set as the starting
serial number (@@@@@@) of
the file name.
For example, when the timecode
of the IN point is "01:00:00:00" at
24 PsF, the starting serial number
is "86400."
DIGIT Specifies the number of digits of
the serial number of the file name
(@@@@@@).
The default setting is six digits.
When the serial number of an
imported file exceeds six digits,
the number of digits is
automatically increased.
DELIMITER Specifies the delimiter to be used
between the file name specified in
BASE NAME and the serial
number (@@@@@@).
"_" (underbar)
(minus) can be selected.
IMPORT LOG Specifies whether or not an
import log file is created and
where the created file is stored.
Disable: An import log file is not
Enable(Log Dir): The import log
Enable(Selected Dir): The import
To view the created import log file,
click the Import LOG button at the
lower right of the DISK CONTROL
tag display.
For details on the import log file,
see "Import log display" on page
22.
For details on how to manage the
import log file, see "Log File
Management" on page 36.
COMMENT Enter comments here to be
written to the import log file.
Example of file name
The following example shows a file name for which
"clip_" has been entered in the BASE NAME box of the
DISK CONTROL tag display.
*
, "." (period), or "-"
created.
file is stored in the directory
for log storage.
log file is stored right under
the specified directory.