Table of Contents
Advertisement
Item
Function/settings
DEPTH
Specifies the bit depth of the main
(for DPX, CIN, or
picture files to be imported.
TIFF files)
8: 8 bits
10(DPX/CIN Only)
16: 16 bits
Note
Video data is recorded on the
tape using 10 bits. Therefore,
when the bit depth of a main
picture file is set to 8 bits, the
lower 2 bits of the video data are
dropped.
Normally, when the bit depth is set
to 16 bits, only the upper 10 bits of
the video data are effective.
However, if a lookup table (LUT) is
used to convert the 10-bit depth of
the input signal to 12- or 16-bit
depth for output, the upper 12 bits
become effective.
IMAGE SIZE
Shows the size of the main picture
files.
RANGE
Specifies how the signal level is
(for DPX, CIN, or
converted for the main picture
TIFF files)
files to be imported.
Head t Full: During import, the
effective video signal range
(64-940) of video signals with
headroom is extended to full
range (0-1023).
Head t Head: Video signals with
headroom are imported as is.
Full t Full
picture data are imported as
is.
LUT
Selects the lookup table to be
(for DPX, CIN, or
applied to imported main picture
TIFF files)
data.
*
off
: No lookup table is applied.
BANK1 to BANK8: Select lookup
table bank 1 to 8.
By using the LUT tag display of
the VTR SETUP menu, it is
possible to store the lookup tables
in the respective lookup table
banks. Stored lookup tables are
maintained even after the VTR is
turned off.
FLIP
Specifies how main picture files
(for DPX, CIN, or
are to be flipped during import.
TIFF files)
H FLIP: Main picture files are
flipped horizontally.
V FLIP: Main picture files are
flipped vertically.
TRANSFER
From the options below, select the
(for DPX files)
information to be recorded to the
TRANSFER field of the header of
imported DPX files.
User Defined, Printing density,
*
Linear
, Logarithmic, Unspecified
Video, SMPTE 274M, ITU-R 709-
4
*
: 10 bits
*
: Full-range (0-1023)
Item
Function/settings
COLOR
Selects the information to be
(for DPX or CIN
recorded to the COLORIMETRIC
files)
field of the header of imported
DPX files or the Channel 1
designator field of the header of
imported CIN files.
For DPX files: User Defined,
Printing Density, Unspecified
Video, SMPTE 274M
R 709-4
For CIN files: Printing Density or
CCIR-X/11 (Rec709)
METADATA
Specifies how the ANC metadata
(for DPX or CIN
stored on the tape is inserted into
files)
the DPX/CIN files.
*
Off
: Does not insert the ANC
metadata into the DPX/CIN
files.
All Data:The ANC metadata is
inserted into the user-defined
data area in the DPX/CIN
files. The Keykode contained
in the ANC metadata is
inserted into the Industory/
Motion-picture film
information header of the
DPX/CIN files.
Keykode Only: The Keykode
contained in the ANC
metadata is inserted into the
Industory/Motion-picture film
information header of the
DPX/CIN files.
Notes
• In order to insert the ANC
metadata into the DPX/CIN
files, the actual line number at
the point where the metadata is
actually inserted on the tape
must be specified by using
HDCAM-SR METADATA LINE
SELECT within the
MAINTENANCE menu on the
VTR.
For details on the
MAINTENANCE menu of the
VTR, refer to the Installation
Manual supplied with the SRW-
5800.
• The Keykode contained in the
ANC metadata is effective only
when it conforms to the format
specified by SMPTE RP215.
*
or ITU-
*
15
Importing Files
Advertisement
Table of Contents
