Table of Contents
Advertisement
Item
REEL NAME (on
the first field)
(for DPX or CIN
files)
REEL NAME (on
the third field)
(for DPX or CIN
files)
PROXY TYPE
(for DPX, CIN,
TIFF, or MXF files)
PROXY SIZE
(for DPX, CIN,
TIFF, or MXF files)
16
Importing Files
Function/settings
Selects the information to be
recorded to the INPUT DEVICE
NAME field or CREATOR field of
the header of imported DPX files
or the Input Device field of the
header of imported CIN files.
*
Auto
: The cassette ID in the
Tele-File or the reel number of
the EDL is recorded.
Manual: Enter the reel name to
the second field manually.
Cassette ID: The cassette ID in
the Tele-File is recorded.
Selects the field to which the
information selected by "REEL
NAME (in the first field)" is
recorded. (For DPX files only. For
CIN files, this selection has no
effect and the selected
information is always recorded to
the Input Device field.)
CREATOR field: The information
is recorded to the CREATOR
field.
*
INPUT DEVICE NAME field
: The
information is recorded to the
INPUT DEVICE NAME field.
TV Reserved Field: The
information is recorded to the
TV reserved field.
Selects the file type of imported
proxies.
BMP: Bitmap
*
JPG
: JPEG
None: Proxies are not imported.
Temporary: Proxies are imported
for display in the GUI.
Imported proxies, however,
are not stored on the disk.
Note
In consideration of transfer speed,
selecting "BMP" than "JPG" is
recommended for importing MXF
files.
Selects the size of imported
proxies.
Width:640: 640 pixels in width
*
Width:320
: 320 pixels in width
Width:160: 160 pixels in width
Note
Due to system limitations, proxies
are not imported for main picture
files that are greater than about
62 MB.
Settings required when "MXF(SR-SQ)" or
"MXF(SR-Lite)" is selected as the file type
Notes
• In order to use the MXF files with the HKSR-5804, the
VTR must be SRW-5800/2 or later.
• When "NFSv2" is selected for the TYPE column in step
2 in "Mounting the NFS Server From the Web
Application Through the Web Browser" on page 10, an
MXF file of 2 GB or greater cannot be created.
The FILE SETUP tag display us shown below.
Set the following items.
In the table below, the default setting is indicated by an
asterisk (*).
Item
Function/settings
AUDIO
Specifies the number of audio
channels to be added to the MXF
files.
0CH: No audio channel is added.
2CH: Channel 1 and 2
4CH: Channel 1 to 4
6CH: Channel 1 to 6
8CH: Channel 1 to 8
10CH: Channel 1 to 10
12CH: Channel 1 to 12
AUTO
HDCAM-SR, channel 1 to 12 are
added. When the tape format is
HDCAM, channel 1 to 4 are
added.
METADATA
Selects whether or not to add ANC
metadata to the MXF files.
*
OFF
ON: ANC metadata is added.
TC
Specifies the type of timecode to be
written to the header of the MXF
files.
*
LTC
: LTC
VITC: VITC
Recount: The value counted from the
IN point timecode is written.
For uncompressed data
The FILE SETUP tag display is shown below.
*
: When the tape format is
: ANC metadata is not added.
Advertisement
Table of Contents
