Electrolux EOG1102COX User Manual page 8

The gas rate is adjusted to suit.
WARNING!
Before you replace the injectors,
make sure that the gas knobs
are in the off position.
Disconnect the oven from the
mains. Wait until the oven is
cold. There is a risk of injury.
3.3 Gas grill injector replacement
1. Release the screws which keep the grill
burner in position (A).
2. Carefully move forward the burner off the
injector support. Slowly move it down. Do
not apply force to the wire of the spark
plug connector (B) and to the
thermocouple conductor (C).
3. Release the burner injector (D) with a 7
mm socket spanner and replace it with a
different one which is necessary for the
type of gas you use.
Refer to "Technical data" chapter.
D
C
4. Assemble the burner in a reverse
sequence. Before you fix the screw,
make sure that the burner is pushed
correctly to the back panel.
Test the grill injectors.
3.4 Oven injector replacement
1. Remove the bottom plate of the oven
cavity (A) to get access to the oven
burner (B).
8 ENGLISH
A
B
B A
2. Release the screw (C), which keeps the
burner in position.
C
3. Carefully move the burner off the injector
support (D).
E
4. Slowly move it to the left side. Do not
apply force to the wire of the spark plug
connector (F) and to the thermocouple
conductor (E).
5. Release the burner injector (D) with a 7
mm socket spanner and replace it with a
D
F