Before First Use; Daily Use - Electrolux EOG1102COX User Manual

5. BEFORE FIRST USE

WARNING!
Refer to Safety chapters.
5.1 Before first use
The oven can emit an odour and smoke during preheating. Make sure that the room is
ventilated.
Clean the oven
1. Remove all accessories and removable shelf sup‐
ports from the oven.
2. Clean the oven and the accessories with a soft
cloth, warm water and a mild detergent.
Turn off the oven and wait until it is cold. Place the accessories and the removable shelf supports in the oven.
5.2 Oven cavity bottom plate
When you buy the oven, at first the oven
cavity bottom plate is together with the
accessories. Before you use the oven for the

6. DAILY USE

WARNING!
Refer to Safety chapters.
6.1 Ignition of oven gas burner
Oven safety device:
The gas oven has a
thermocouple. It stops the gas
flow if the flame goes out.
1. Press the knob for the gas control and
turn it to .
2. Keep the knob for the gas control pushed
for 15 seconds or less to let the
thermocouple warm up. Do not release
the knob until the flame ignites, otherwise
the gas flow is interrupted.
12 ENGLISH
Step 1
Preheat the empty oven
1. Set the maximum temperature for the function:
Time: 1 h.
first time, put the bottom plate with the hole
on its front part in the burner area, as shown
in "Product description" chapter.
Do not keep the knob for the gas control
pushed for more than 15 seconds. If the oven
burner does not ignite after 15 seconds,
release the knob for the gas control, turn it
into off position, open the oven door. Wait
minimum 1 minute, close the oven door and
try to ignite the oven burner again.
6.2 After igniting the oven gas
burner
1. Release the knob for the gas control.
2. Turn the knob for the gas control to set
the temperature.
Control the flame through the holes in the
cavity bottom plate.
The power indicator turns on when you turn
the knob for the oven functions.
Step 2
.