Important Safety Information You MUST read these warnings carefully before installing or using the oven. If you need assistance, contact our Customer Care Department on 08705 950950 Installation • Do not use this oven if it is in contact with water and never operate it with wet hands.
Contents For the User For the Installer Important Safety Information Instructions for the Installer Description of the Appliance Building in Before the First Use Electrical Connection Using the Oven Gas connection Using the Gas Oven Conversion from Natural to LPG Gas Using the Gas Grill Cleaning the Oven Something Not Working...
Description of the Appliance 1. Control panel 2. Minute minder 3. Oven Light & Electric Grill control knob 4. Gas oven control knob 5. Grill control light 6. Mains on light 7. Grill 8. Oven lamp 9. Oven cavity bottom plate 10.
Gas Oven Control Knob Oven burner off 150 - 240 Range of temperature adjustment for conventional cooking Minute minder The minute minder will mark the end of a timed period with an acoustic alarm. The maximum timing is 60 minutes. Turn the minute minder knob clockwise to the maximum time position, then turn it back to the required time.
Before the First Use Remove all packaging, both inside and outside the oven, before using the appliance. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1.
Using the Gas Oven Cooking Chart During cooking, the door should be opened as little as possible to avoid heat loss, and excessive fuel consumption. TEMP. SHELF COOKING FOOD (°C) POSITIONS TIME To ignite the oven gas burner: MEAT & POULTRY 1.
Grilling Cooking chart Grilling must be carried out with the oven door closed. Cooking time depends on the thickness of the meat and The grill pan handles must be removed from not on its weight. the pan during grilling. Always use oven gloves to remove and replace the grill pan handles.
Cleaning the Oven Oven Cavity Before cleaning always allow the cooling fan to cool the oven down before switching off at the The enamelled oven cavity is best cleaned whilst the electricity supply. oven is still warm. This appliance cannot be cleaned with steam or Wipe the oven over with a soft cloth soaked in warm with a steam cleaning machine.
Replacing the Oven Light Disconnect the appliance. If the oven bulb needs replacing, it must comply with the following specifications: - Wattage power: 15W, - Voltage: 230V (50 Hz), - Resistant to temperatures of 300°C, - Connection type: E14. These bulbs are available from your local Service Force Centre.
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Electrolux Service Force Centre by telephoning: 0870 5 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
Guarantee Conditions Electrolux Guarantee conditions European Guarantee If you should move to another country within Europe then We, Electrolux, undertake that if, within 12 months of your guarantee moves with you to your new home the date of the purchase, this Electrolux appliance or subject to the following qualifications: any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our...
Instructions for the Installer Technical Data Oven Model Name: EOG 601 Oven Burner 2,700 W (Natural gas) 2,500 W (LPG) APPLIANCE GAS SUPPLY: Natural Gas G20 20mbar Electric Grill 1,650 W APPLIANCE CATEGORY: II2H3+ Oven light 15 W Cooling fan...
Please ensure that when the oven is installed it is easily accessible for the engineer in the event of a breakdown. The surround or cabinet into which the oven will be built must comply with these specifications: the dimensions must be as shown in the relevant diagrams;...
Electrical Connection The oven is designed to be connected to 230V (50Hz) electricity supply. The oven has an easily accessible terminal block which is marked as follows: Letter L Live terminal Letter N Neutral terminal or E Earth terminal THIS OVEN MUST BE EARTHED The cable used to connect the oven to the electrical supply must comply to the specifications given below.
Gas connection Connecting the appliance to the View flexible from gas supply metallic pipe( above gasket The use of rubber flexible hoses is not permitted. The gas supply connection ramp is located in the upper side of the oven, right behind the control panel. gas supply ramp To carry out the gas connection: 1.
Conversion from Natural to LPG Gas IMPORTANT The replacement/conversion from Natural to LPG should only be undertaken by a competent and qualified engineer. It is important to note that this model is designed for use with natural gas but can be converted for use with LPG providing the correct injectors are fitted.
Page 18
Minimum level adjustment of gas oven burner This procedure must be undertaken by a competent and qualified engineer only. 1. Disconnect the appliance from the mains supply. 2. Remove all the knobs. 3. Open the oven door and locate the ventilation grill which is fixed right below the control panel.