Weekly Maintenance:
Wipe down display. Use mild solution of non-phosphate cleaner on damp microfiber
cloth.
Wipe down handrails and traction strips with soft cotton cloth and mild soap and
water. Cloth should be damp not wet.
Vacuum or wipe down the deck area between treadbelt and frame, including the
visible part of the rear roller.
Clean treadbelt walking surface: Vacuum treadbelt to remove loose dirt. If vacuuming
does not remove dirt, Landice recommends the use of a medium stiff nylon bristle
brush to remove dirt trapped in treadbelt surface. A damp (not wet!) sponge can be
used to finish the cleaning process.
Monthly Maintenance:
Take off motor cover and vacuum. Be careful not to touch any of the circuit boards.
Move the treadmill and vacuum around the treadmill area.
Examine the deck and treadbelt for wear and replace if necessary.
Check condition of line cord for any cuts, gouges, or broken prongs on the plug ends.
Every Six Months:
Check all locking levers not to be broken and for tightness, especially the upright and bed
area.
You can also perform an amperage check to see if the treadbelt is dragging excessively and
thus drawing excessive current as follows.
Maintenance Checklist
1 800 - LANDICE | SERVICE@LANDICE.COM | WWW.LANDICE.COM