-
&
Motor Pan Removal
Front Roller
Drive Belt Replacement Instructions
IMPORTANT:
If you are only replacing a component in the motor pan,
STOP here and proceed to the specific install instruction page!
If you are removing the Treadbelt, Front Roller, Drive Belt, or Deck, continue below.
Front Roller And Drive Belt
Using a 4mm Allen Wrench, continue removing all the bolts circled above.
Once the bolts are removed, you are now able to remove the entire motor pan from the
machine. From here, you can simply remove the drive belt and/or front roller and
replace if necessary.
Please proceed to "Treadbelt and Deck Replacement Instructions" if you are
replacing those specific parts.
1 800 - LANDICE | SERVICE@LANDICE.COM | WWW.LANDICE.COM