Treadbelt and Deck Replacement
Treadbelt & Deck Replacement
TOOLS NEEDED: ● 5mm Allen Head Wrench
BEFORE YOU BEGIN: You will need to remove the motor cover, motor pan, Front and Rear Rollers
from the unit to access the treadbelt. Please refer to "Motor Cover & Pan Removal", "Rear
Roller" and "Front Roller" Instructions for more assistance.
Begin by folding the arms down on the machine flat, and then propping the treadmill up against a
wall, rear roller side up. Slide the side frame covers up and off the unit.
Next, lay the treadmill face down. Using a 5mm Allen Wrench, remove all 10 bolts, as circled
above. Remove the deck brackets from the unit.
1 800 - LANDICE | SERVICE@LANDICE.COM | WWW.LANDICE.COM