8.3. Manual Calibration
Teledyne GMI's FlexiCal Plus software facilitates manual calibration by:
• Setting up of the calibration test.
• Step by step instruction during calibration.
• Storage of test results files.
Manual calibration requires the user to control the delivery of gas during calibration.
For details on manual calibrating of the monitor using the FlexiCal Plus software, please refer to the
FlexiCal Plus User Handbook
8.4. Automatic Calibration
For details on automatic calibration of the monitor using the GDUnet station, please refer to the
following documents:
•
GDUnet User Handbook
•
FlexiCal Plus User Handbook
49391
Revision 3
- part no. 99551.
- part no. 14765
- part no. 99551
Figure 91: GDUnet Station
Gasurveyor 700
USER MANUAL
55