Removing Iris Motor; Assembly Of Iris Motor - Leica M500 N Service Manual

Service manual Leica M525
Doc Code 10 665 751
2
M2x2
DIN 551
Fig 15B
1
M3x4
DIN 553
5-7

5.1.10 Removing Iris motor

1. Perform procedure 5.1.8 step 1 to 4.
2. Dissolve shellac of pin screw (Fig 15B-1) with solvent (alcohol,
spirit) and pull out motor.
3. Dissolve shellac of pin screw (Fig15B-2) with solvent and
remove gear.
5.1.11 Assembling Iris motor
1. Perform procedure 5.1.10 in reversed order.
2. Secure screws (Fig 15B-1, Fig 15B-2) with shellac. Grease gear
with FM5 (10 289 967).
Replacing modules
04/2004 - EBTH Update 07/2007